What is the size of a double sink vanity

If you are remodeling a master suite, a double-sink vanity may be the best to offer separate areas in a shared bathroom. Double vanities are generally between 60” and 72” in width, but you will find some as small as 48”.

How wide should a vanity be for 2 sinks?

Typically, the best size for a double vanity is 72 inches wide. This is large enough to comfortably accommodate both sinks while still moderate enough to fit in most bathrooms. Additionally, 72-inch vanities usually provide adequate storage space.

What is the standard length of a double vanity?

When you have extra room, opt for twice the functionality with a double vanity. Double vanities measure between 60 and 72 inches in length, depending on how much counter space you need on either side of the sinks.

How long should a vanity be for 2 sinks?

60-Inch: If you’ve been wanting his and hers sinks, the 60-inch bathroom vanity is the ideal size for it. Offering two sinks, a generous amount of countertop space, and plenty of storage space, it is perfect for couples.

How much space do you need between double vanity sinks?

In a double-sink vanity, the sinks should be 30″ to 36″ apart, measured from center to center.

How do you measure a double vanity?

You can use a tape measure to get the general dimensions of your bathroom vanity. Take a measurement at the widest part of the variety in contact with the the floor, which is your base width. Then, measure across the countertop, which is your top width.

Is 60 inches too small for a double vanity?

When looking for a double vanity that can be used by two persons comfortably at the same time, you should consider having around 30 to 36 inches of space per person. This means double vanities that range from 60 to 72 inches in size are the best ones as they offer ample space and ensure utmost comfort.

What is a standard size vanity?

Standard vanity dimensions are typically between 18″ – 72″ wide. For a single vanity, the most popular widths are 24″, 30″, 36″, 48″, and for double vanities the most popular widths are 60″ and 72″, but start at 48″. The standard depth of a vanity is typically around 20″, but narrower options are available.

Do double sinks add value?

Double vanities also add value to your home. While one sink is typical and essential, two sinks make your home more desirable and attractive to potential buyers. Often, the choice to buy one home over another is how practical the bathroom is; a double vanity definitely adds to that.

What is the smallest vanity for a double sink?

If you do the math, that calls for a minimum of 60 inches, or 5 feet of wall space. And 5 feet really isn’t enough for comfortable, simultaneous use of both lavs. Six feet is a real-world comfort minimum, with 36 inches between lav centers.

Article first time published on

How do I know what size vanity I need?

The biggest factor to consider when buying a bathroom vanity is the size. Your floor plan and overall space will help you determine the best size vanity for your room. Width, depth, and height dimensions need to be factored into your choice and are based first and foremost on your bathroom’s size.

How do you measure a vanity sink?

1. Start with the width. Measure the distance from one side of the basin to the other.
2. Next, measure the length. This is the distance from the rear of the basin to the front.
3. Then, on the exterior of the basin, measure from the top to the bottom. …
4. Finally, measure the depth.

Are double sink vanities worth it?

Double bathroom vanities offer all the benefits of a vanity times two, providing space for two individuals to get ready each morning, less stress about sharing the bathroom, and more convenience and flexibility overall.

Can you replace a single vanity with a double sink?

It’s entirely possible to replace a single sink with a double sink, although it requires a bit of work and money. Double bathroom vanities, sometimes called “his and her” sinks, can be more practical in situations where two people go through their morning routines simultaneously.

How important is a double vanity for resale?

When considering a bathroom remodel, think about why you want to make changes. Is it to increase the resale value of your home? Then may want to think twice. If your bathroom is large enough for a double vanity and has adequate storage and counter space, having two sinks will likely be more desirable for buyers.

How wide is a vanity sink?

The vanities usually start at a minimum of 60 inches wide and can go to 84 inches at the extreme. Average double sink: The average sink size for this style is usually round or circular with an average measurement of 19 inches by 19 inches with a standard height of 8 inches.

How much does a double vanity cost?

A double vanity costs about $750 to $3,200 for the new unit and installation. If you don’t already have the square footage available, you should consider hiring a bathroom remodeler to design and build the space.

What size bathroom sink fits in a 24 inch cabinet?

If your vanity is 24-inches wide, look for a sink no more than 16-inches long to get at least four inches of counter space per side. The maximum sink length (or diameter) you can get is 22 inches, but this will leave no usable counter space.

Can 2 sinks fit in 48 vanity?

As you probably realize, a vanity only 48 inches wide doesn’t give you much counter space with one sink, let alone two. … Some ways to make a small bathroom vanity feel larger include having the sink off to one side, which will give you more counter space, and adding the widest mirror you can fit.

What is the width of a double vanity?

Typically, bathroom vanities are available in depths of 12, 15, 18, and 21 inches deep. The standard size is 21 inches, and there are also a few options that are as deep as 24 inches for large spaces and those who need more counter space or storage.

What is comfort height vanity?

Comfort Height: In recent years, taller, comfort height vanities have grown in popularity. Comfort height bathroom vanities measure to be about 36 inches in height, compared to the standard 30-inch or 32-inch. … The additional inches makes access things easier and puts less strain on the back of those using it.

What height should bathroom sink be?

A bathroom sink should sit somewhere between 29 and 36 inches high, depending on several factors. Traditionally, 32 inches was the norm, but modern standards have made 36-inch height common as well.

What size bathroom sink do I need?

1. If this is a simple replacement, measure the length, width and height of your current sink and choose one with the same measurements.
2. Measure width from side to side and length from front to back–where you measure will depend on the installation type. …
3. Height and depth are two separate measurements.

Are bathroom vanities a standard size?

Standard bathroom vanities are generally available in the following widths (presented here in inches): 24, 30, 36, 48, 60, and 72. … If you have a narrow bathroom layout, you can find shallow-depth vanities that range between 16 and 18 inches.

Should you put a double sink in a small bathroom?

A vanity with two sinks increases both counter space and storage in your bathroom. A double sink is not for everyone. … Squeezing in an extra sink might make the room more crowded and give you less space to move around, which would actually make the resulting design less convenient when you get ready in the morning.

Can you connect two sinks to one drain?

In most cases, you can easily adapt the supply and drain pipes to accommodate two sinks, using tee fittings, special valves, extension pipes and hoses. You may have to vent each sink separately, though, depending on your local plumbing codes.

Does a double sink need two traps?

A double bathroom sink installation rarely requires more than one P-trap. The usual practice is to connect the two sinks to a tee and then feed the tee into a single P-trap, which then connects to the drain.