Why is cold air coming out of my return vent?

Why is cold air coming out of my return vent?

So why is cold air coming out of your vents? It is most likely a leaky duct system—but you should have your home’s heating efficiency checked out by an HVAC professional.

What does it mean when the heat blows cold air?

Your furnace may be blowing cold air because the filter is too dirty. A dirty air filter blocks airflow over the furnace’s heat exchanger, causing it to overheat. When overheating, your furnace can trip a high limit switch, causing the furnace burners to shut off so that the heat exchanger does not crack.

What does the Atwood hydro flame furnace smell like?

I have an Atwood Hydro Flame furnace in my ’13 Montana. We’ve had the rig since new, two years this past October. Just recently I’m noticing a faint exhaust smell inside when the furnace is running. I do NOT smell propane, just the exhaust smell of burnt propane – like a propane fueled forklift. All appears to be working fine, just the smell.

What causes a furnace to turn off in an RV?

Check for the furnace box, see if there is anything that is blocking the furnace vents. Any obstruction in the vents will result in malfunctioning and heating of the furnace. This will lead the temperature limiting switch to turn off the furnace. Vents can blocked due to various things, debris dust can also block it.

Why does my furnace have a faint exhaust smell?

Just recently I’m noticing a faint exhaust smell inside when the furnace is running. I do NOT smell propane, just the exhaust smell of burnt propane – like a propane fueled forklift. All appears to be working fine, just the smell. Part of the question is to define how much odor?

What should I do if my RV furnace is corroded?

Prepare a slurry blend of water and baking soda. Disconnect carefully the wires and the connections from the terminal which is corroded. Make use of a toothbrush for applying the baking soda mixture and scrub the corroded material carefully.

Why is my RV furnace blowing cold air?

Anything under 10.5 will result in the fan operating but just blowing cold air as the gas valves will not open. Next the control panel at the distribution center inside the RV to ensure there is power coming into the RV and the 12-volt automotive fuse is not blown. Most RV furnaces are controlled by a thermostat on the wall.

How does the furnace work in a RV?

Ducts – round or rectangular tubes that carry heated air from the furnace to the RV interior. Exhaust – An air outlet on the exterior of the RV that vents exhaust gases, including carbon monoxide and carbon dioxide, from the Combustion Chamber.

When do I need to troubleshoot my RV furnace?

RV furnace troubleshooting may also be necessary when a spider has spun its web inside the furnace area. Your next RV furnace troubleshooting is to verify that there is 10.5 volts of battery power coming into the unit. Anything under 10.5 will result in the fan operating but just blowing cold air as the gas valves will not open.

Where does the heat come from in an RV?

Most RV furnaces are controlled by a thermostat on the wall. With road vibration and temperature changes inside the RV, the thermostat could be damaged. The last thing to check is the corrugated tubing that delivers the heat from the furnace to the vents.

You Might Also Like